Hydro Source Services, Inc. - Specializing in water/wastewater conveyance and treatment solutions for the Central Texas area.

Home
About Us
Our Services
Homeowners
Builders/Plumbers
Engineers/Developers
Municipalities
Brands We Represent
Service Areas
Resources
FAQs
Reviews
Careers
Contact Us

Our Services

Service Areas Resources FAQs Reviews Careers Contact Us Request Service

Project Start-Up

Please complete the form provided below so that we can best assess your needs. A representative from Hydro Source will then contact you to schedule the requested service. All items marked with * are required.

Pump 1

Pump 2

Pump 3

Pump 4

All questions must be answered in order to complete the form.

Tank has been backfilled and is installed above finished grade? (12" EXT. MAX)

Tank is completely empty and free from all debris? (NO LIQUID)

Center of inlet pipe is 30" (min) from the bottom of the tank?

Inlet grommet is installed correctly using a hole saw?

Discharge assembly is installed per factory diagram? (VALVE TO TANK)

Mushroom vent is installed?

1" tank adapter and cord grip installed on the inside of the FRP tank?

1" electrical PVC conduit installed from the tank to the panel?

The control panel is mounted 40" to 60" above finished grade?

All the conduit penetrations are on the bottom of the control panel?

The conduit penetrating the panel is sealed using duct seal?

Dedicated 30 AMP circuit feeding the control panel? (LABELED)

Verify four #10 gauge wires are connected. (2 hots, 1 ground, 1 nuetral)

Verified that the voltage at the control panel is between 216V and 264V?

Confirm that there is no moisture inside the EQD?

The EQD plug must be able to extend past the top of the tank? (24" MAX)

The rope is secured with a ziptie to the top of the tank?

Discharge piping size is 1.25" from the tank to the tap?

All residential / main valves are opened before start-up?

All electrical, operational and start-up test performed as directed in the manufacturer's installation manual?

Start-up Approved?

Please contact Hydro Source Services, Inc with any questions at 512-945-2356

Hydro Source Services, Inc.

14 Applegate Circle, Round Rock, TX 78665

512.572.6188

info@hydrosourcetx.com

DESIGNED/DEVELOPED BY THIRD EYE CREATIVE